Tips for Drilling Ice Holes

View More Articles

Article Category: Fishing

The auger let out a steady two-cycle scream as it chopped through a foot and a half of ice. Chips and shards fell around my feet until the blades finally broke through. I hit the throttle and cleared out the slush, before walking a few yards and punching another hole. Behind me my partner followed, checking the depth of the water with a vexilar. In ten minutes, we had several holes drilled, cleaned and scanned for depth. Now, we were ready to fish under the ice.
Drilling holes˝ my seem straight forward but there are some tricks of the trade that can make you more efficient when cutting the ice. Here are some suggestons for this upcoming hard water season with particular focus on powered augers.

SECURE YOUR FOOTING

One tip shared to me on an outing is to drill over snow patches on the ice. There are several reasons for this approach. First, snow is a better gripping surface than ice for your feet, increasing your stability while drilling. Secondly, the snow surrounding turns to slush when you break through the ice. You can then use the slush to anchor your portable ice hut and secure the tent skirt in windy conditions. Early in the season after a thaw, even snow can be hard to find. In this case, pack a pair of ice grips or cleats for sure footing in these slippery conditions.

LET THE BLADE DO THE CUTTING

A common drilling mistake is applying too much downward pressure on the auger. Pushing down too hard won’t make an auger cut any faster and in some cases, will slow things down. A good indicator that you are pushing too hard is if you lose your balance or surge forward when the auger breaks through the ice.
“I found that with the chipper drill, you need to put just enough down pressure to make the drill cut without overloading the power head,” says Cyril Zieglmeier of Strikemaster Ice augers. He explains that ice augers featuring blades like their Laser 224, behave differently than chipper style drills.
With the Laser drill you should never need to put downward pressure on it. It should cut its best with no load or even pulling it up just a little, and adding a little upwards pressure as you feel the tip break through the bottom of the ice,” he added.

CLEAN THE HOLE

Let’s return the the scenario I mentioned at the beginning of this article. It’s standard practice with my fishing friends that as one of them drills holes, the others follow and clean them. This clean up role is more tolerable (and in the best circumstances unnecessary) if the angler drilling the holes makes and effort to remove slush with the auger. I got the straight goods on how to drill a clean hole from ice fishing guru, Dave Genz.

“One thing that works really well after you drill through the ice is to kick the snow away form one side of the hole, then run the auger again as you lift it out,” Genz said. He explains that you don’t kick the entire mound of ice shards away, only a section.

This cleared area acts as a channel, directing the slush and water away from the hole as you run and remove the auger. The remaining snow around the hole directs water to the channel and prevents additional snow and slush from entering the hole. “This approach usually gets almost all the slush out,” Genz noted.

“It’s best to kick snow away on the downwind side, this way when you’re checking the depth with your electronics you can place it in the space you cleared and fish with the wind at your back,” he said.

KEEP THE BLADES CLEAN

Having ice build up on blades during an outing dramatically reduces your drilling efficiency. A good rule of thumb with power augers is to run them above ice for a few seconds to spin off the remaining water before setting them down.
Genz recommends clearing a section of snow away on the ice before putting your auger down. This way you can place the blades on ice instead of snow. This prevents the snow from sticking to the blades.

Zeiglmeier talks about lying an auger in the sun and explains that this helps keep the drill warmer than if being stored in the shade, and in some cases, provides enough heat to keep the ice from forming on the blades. Should ice accumulate on the blades, which is often unavoidable in extremely cold conditions and when drilling lots of holes, it is better to remove it before ruining the unit.

The Genz Tool is a good product that has a chipper at one end and a scoop at the other. A small hammer is just as effective. Tap the bottom of the blades (not the edges) to remove ice form the blades. In most cases the ice shatters right off. Using a tool with a handle is a very safe way to clear ice and keep your hands away from auger’s shape blades.

Lastly, never drill the auger halfway through the ice and use this half hole as storage. This practice is not recommended by manufacturers as the drill could freeze in place and removing it could result in damage to the drill or the powerhead.

Try these hole cutting tips on your next outing. Not only will you be more efficient at getting through the ice, but you’ll also spend less time drilling and cleaning and more time jigging and hooking fish.


Similar Articles

Worm Tricks for Walleye

Using worms as bait is often scoffed at by most anglers now a days, but this tried and true bait still works to catch the lunkers. Worms are the most versatile bait in the walleye angler’s arsenal. Crawlers work in the cold water of spring and fall, and during the hottest days of summer. They catch walleye in rivers and lakes. These fish like the smell, look, and feel of a worm. Yet many anglers, weaned on television fishing shows and endless super-lure infomercials, consider live-worm fishing passe, even vaguely dirty.

Read More ...

Winter Walleye
Winter Walleye Movements

Simple article describes how walleye change their home-range when winter sets in as well as the fish change their eating habits. Sometimes walleye establish a smaller home-range during the winter, usually only a fraction of the size of their summer range. On smaller lakes walleye generally stay close to most traditional structures such as steep-breaking humps, deeper portions of long points and deep saddles.

Read More ...

Water Clarity (Bass Fishing)

This article contains critical information regarding water clarity and how it relates to catching elusive small and largemouth bass. It is broken down into sections based on visibility and what tactics to use. In truth, water clarity can be one of the most important elements in locating small and largemouth bass, especially when you correlate it with time of season.

Read More ...

Walleye Trips to Lac Seul

Michael Bilsbarrow, a Patricia Region resident, shares some common strategies and angling methods practiced and perfected on the Lac Seul reservoir. These tried and true techniques consistently land trophy fish off of this gargantuan body of water. Local knowledge is no doubt a great asset when it comes to fishing a big lake like this one and most fish camps and resorts on the lake offer guide services. On your first trip to Lac Seul you would be well advised to engage the services of one for at least a day or two.

Read More ...

Walleye in Autumn

Writer explains just why the walleye bite can be so good in the autumn months. He also details various tips/strategies for angling and landing good sized fish in changing conditions on the lake. During the months of September, October and november; in the Upper United States and Canada, patterns develop that may land you your biggest/best walleye of the year. If you follow the progression of the season, you may catch big hog walleye up until the ice forms.

Read More ...

Trolling Up Moonlit ‘Eyes

Walleye really turn on at dawn and dusk. the walleye’s unique eye structure gathers light better than a squirrel-on-steroids gathers nuts, and this gives the walleye a huge advantage at low light times. It’s like walleye are wearing night-vision goggles while they are feasting on those helpless little yellow perch.

Read More ...

Trolling Spinnerbaits – Trophy Muskie

Trolling spinner baits allows you to quickly probe prime locations, such as weed-flats and break lines, searching for actively feeding fish to enticing neutral ones to strike. Muskie trolling spinnerbaits allow you to quickly probe prime locations, such as weed-flats and break lines, searching for actively feeding fish to enticing neutral ones to strike.

Read More ...

Trolling for Top-water Muskie

When I started fishing for muskies, I spent countless hours casting big bucktails, jerkbaits and top-water plugs over shallow weed flats without so much as a promising follow. It was suggested to me that I try trolling… “”Troll for muskies in four feet of water?” I commented. “I’ll be hanging up in weeds all day.” Initially, I got caught on the weeds, and lots of ’em. Every couple of minutes I had to stop to remove dense green cabbage from my line and lures…

Read More ...

Trolling Crankbaits For Bass

Trolling crankbaits is a great technique and teacher when it comes to finding bass. Pay attention in class this summer and you’ll graduate with honours in crankbait fishing from Bass U. Fish are creatures of habit. They follow behaviour patterns that keep them safe from predators, physically comfortable, and well fed. It’s a matter of life and death. If a bass is having its best luck feeding on top of a reef during a west wind, you can be sure it will be there every time those conditions occur.

Read More ...

Travelling Light in Northwest Ontario

Gord Ellis, shares a small story and some great tips on how to pack/prepare for an extended trip canoeing/hiking or at your favourite fly-in destination, here in “Canada’s Heartland”, the Patricia Region. Carrying a 7-foot one-piece spinning rod is obviously out. So is that big tackle box. It’s unwieldy and often requires an extra portage. Scale way down.

Read More ...